Saw blades
Saw blades HSSE service life approx. 1-12 m², depending on quality of material
Saw blades HM service life approx. 4-40 m², depending on quality of material
Maximum saw blade thickness (cutting width): 3 mm
Recommended saw blade thickness: 2.5 mm for HSSE / 2.7 mm for HM
Saw blade bore and pinhole pattern: 50H6, 4 secondary holes D15 mm on an 80 mm bolt circle
Diameter of saw blade flange = 140 mm
General recommendations for saw blade selection
- - for HSS saw blades always use HSS/E quality
- - always use HSS and HM saw blades with full coating, even after resharpening
- - standard quality equal or better than 0.1 mm
- - tooth shape: chip breaker
NOTE
Many factors must be considered when selecting a provider, including:
Quality, reliability, accuracy, service life, advice, price, resharpening service, recoating, availability etc.
Cutting parameters saw
Saw blade diameter 350mm - cutting speed, maximum: 318 m/min
Saw blade diameter 370mm - cutting speed, maximum: 337 m/min
Saw blade diameter 400mm - cutting speed, maximum: 364 m/min
Feed per tooth fz, max: 0.4 mm/tooth
Maximum mechanical power of the saw: 18 kW
Finishing accuracy
Reference workpiece Da= 50 mm
ACS102 + LM Sawing+Length measuring
length tolerance of workpiece: +/- 0.05 mm
+/- 0.15 mm at Cmk 1.67; standard deviation 0.03 mm
Production output
ACS102 + LMSawing+Length measuring
minimum cycle time = 1.35 s; 2,500 pcs/h maximum
double cut 5,000 pcs/h maximum
triple cut 6,250 pcs/h maximum
quad-cut 9,000 pcs/h maximum
Sound level
Without colliding of material in the bundle loading magazine BM, 86dBA.
Supplementary noise suppression measures 83dBA are available at additional cost.