Power requirements for ACS basic models, without WDM
Trafo 3pha.
3x400V 3x460V prim. 575V//
50 Hz 60 Hz sec. 460V 60Hz
ACS102... 40 kVAapprox. 80 Aapprox. 52 A41 A // 52 A
Compressed air requirements
ACS102... approx. 3.5 - 4 m³/min
Comment:
The compressed air consumption may be altered via operator adjustments, for ex. some blowers may not be required.
Operating supplies
Initial equipment
The following operating supplies are required for the base machine:
PLANTO HYD 46 S Fuchs Europe Schmierstoffe GmbH phone: +49 621 37 01-0
- clamping devices for grip feeder, saw clamp and valve blocks; 3.0 l capacity
The use of alternative products is possible in consultation with Rattunde & Co GmbH.
WEDOLIT N52 Wilhelm-Dietz GmbH & Co KG phone: +49 211 71 72 77
- for micro-spray lubrication; a tank of 30 l capacity
The use of alternative products is possible in consultation with Rattunde & Co GmbH.
WEDOLIT K88 Wilhelm-Dietz GmbH & Co KG phone: +49 211 71 72 77
WEDOLIT K102 Wilhelm-Dietz GmbH & Co KG phone: +49 211 71 72 77
- for micro-spray lubrication; a tank 7% / 93% distilled water; 30 l capacity
The use of alternative products is possible in consultation with Rattunde & Co GmbH.
Microlube GL 261 Klüber phone: +49 89 78 76-598
- Central lubricating system for ball screws and linear guides and for the clamping devices; 3 kg capacity
The use of any alternative products voids the warranty.
MOLYCOTE DX Dow Corning GmbH Wiesbaden phone: +49 611 237 1
- grease gun for BM bundle loading magazine height adjustment
The use of any alternative products voids the warranty.
SYNTHESO D 220 EP Klüber phone: +49 89 78 76-598
- saw gear box, 10 l capacity
The change of the oil is only necessary following 2 years or 10,000,000 pieces, whichever comes first.
The use of any alternative products voids the warranty.